Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
documentation:config-parameters [2019/09/19 16:00]
fachet
documentation:config-parameters [2019/09/19 16:05] (current)
fachet
Line 13: Line 13:
 </​code>​ </​code>​
  
-Use cli get/set to read and write paramters. Example:+Use cli get/set to read and write paramters. ​ 
 +Example ​as user admin (password of web gui): 
 +<​code>​ 
 +NB1600 Command Line Interface (version 1.1) 
 +> get network.lan.1.address 
 +network.lan.1.address=192.168.2.2 
 +> set network.lan.1.address=192.168.2.1 
 +> get network.lan.1.address 
 +network.lan.1.address=192.168.2.1 
 +</​code>​ 
 +Example as user root (password of web gui):
 <​code>​ <​code>​
 $ cli get network.lan.1.address $ cli get network.lan.1.address
 network.lan.1.address=192.168.2.1 network.lan.1.address=192.168.2.1
- 
 $ cli set network.lan.1.address=192.168.2.2 $ cli set network.lan.1.address=192.168.2.2
- 
 $ cli get network.lan.1.address $ cli get network.lan.1.address
 network.lan.1.address=192.168.2.2 network.lan.1.address=192.168.2.2