This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
documentation:config-parameters [2015/09/23 07:36] – hess | documentation:config-parameters [2023/01/31 11:54] – schmitt | ||
---|---|---|---|
Line 2: | Line 2: | ||
====== Configuration Parameters ===== | ====== Configuration Parameters ===== | ||
A list of all existing configuration parameters including default values can be found under ''/ | A list of all existing configuration parameters including default values can be found under ''/ | ||
+ | |||
+ | Using the command line interface (cli) all paramters can be shown. A trailing ´.´ acts as a wildcard and shows all subsequent paramers. Examples: | ||
+ | |||
+ | < | ||
+ | $ cli get -c . | ||
+ | $ cli get -c wanlink | ||
+ | $ cli get -c wanlink. | ||
+ | $ cli get -c wanlink.1 | ||
+ | $ cli get -c wanlink.1. | ||
+ | </ | ||
+ | |||
+ | Use cli get/set to read and write paramters. | ||
+ | Example as user admin (password of web gui): | ||
+ | < | ||
+ | NB1600 Command Line Interface (version 1.1) | ||
+ | > get network.lan.1.address | ||
+ | network.lan.1.address=192.168.2.2 | ||
+ | > set network.lan.1.address=192.168.2.1 | ||
+ | > get network.lan.1.address | ||
+ | network.lan.1.address=192.168.2.1 | ||
+ | </ | ||
+ | Example as user root (password of web gui): | ||
+ | < | ||
+ | $ cli get network.lan.1.address | ||
+ | network.lan.1.address=192.168.2.1 | ||
+ | $ cli set network.lan.1.address=192.168.2.2 | ||
+ | $ cli get network.lan.1.address | ||
+ | network.lan.1.address=192.168.2.2 | ||
+ | </ | ||
+ | |||
+ | /* | ||
<php> | <php> | ||
echo "< | echo "< | ||
- | echo "< | ||
- | echo "< | ||
$lines = file(" | $lines = file(" | ||
foreach ($lines as $line_num => $line) { | foreach ($lines as $line_num => $line) { | ||
- | if (substr($line, | + | |
+ | | ||
+ | | ||
+ | $title | ||
+ | echo "< | ||
+ | echo '< | ||
+ | } | ||
$fields = preg_split('/ | $fields = preg_split('/ | ||
- | | + | |
- | $key = $fields[0]; | + | $key = $fields[0]; |
- | $val = $fields[1]; | + | $val = $fields[1]; |
- | | + | |
- | echo "< | + | echo "< |
- | echo "< | + | echo "< |
- | echo "</ | + | echo "< |
- | } | + | |
+ | } | ||
} | } | ||
echo "</ | echo "</ | ||
echo "</ | echo "</ | ||
- | </ | + | </php> |
+ | */ | ||
+ | <code c config-desc.txt> | ||
+ | # | ||
+ | # Config Descriptions | ||
+ | # =================== | ||
+ | # | ||
+ | # This file provides a list of all possible configuration parameters for software release 4.1.0. | ||
+ | # An entity index is denoted as ' | ||
+ | # | ||
+ | # (C) 2017 NetModule AG, Switzerland | ||
+ | # | ||
+ | |||
+ | # config parameter | ||
+ | |||
+ | # | ||
+ | config.version | ||
+ | config.product | ||
+ | config.info | ||
+ | |||
+ | #System | ||
+ | system.time | ||
+ | system.login_show_msgs_infos integer 0 = disabled, 1 = enabled shows error massages on the login screen | ||
+ | system.prompt | ||
+ | |||
+ | # networking | ||
+ | network.hostname | ||
+ | network.timezone | ||
+ | network.tcp.timestamps | ||
+ | network.icmp.forward integer 0 = disable, 1 = enable | ||
+ | network.mss.status | ||
+ | network.mss.adjustment | ||
+ | |||
+ | # certificates | ||
+ | cert.deployment | ||
+ | cert.settings.organization | ||
+ | cert.settings.department | ||
+ | cert.settings.location | ||
+ | cert.settings.state | ||
+ | cert.settings.country | ||
+ | cert.settings.common | ||
+ | cert.settings.email | ||
+ | cert.settings.expiry | ||
+ | cert.settings.phrase | ||
+ | cert.settings.keysize | ||
+ | cert.settings.dhsize | ||
+ | cert.settings.sigalg | ||
+ | cert.settings.cipher | ||
+ | cert.scep.status | ||
+ | cert.scep.url | ||
+ | cert.scep.fingerprint | ||
+ | cert.scep.fpalg | ||
+ | cert.scep.caident | ||
+ | cert.scep.timeout | ||
+ | cert.scep.interval | ||
+ | cert.scep.idtype | ||
+ | cert.scep.phrase | ||
+ | cert.ignore integer 0 = disabled, 1 = enabled | ||
+ | |||
+ | #ACME | ||
+ | acme.0.status integer 0 = disable, 1 = enable | ||
+ | acme.0.domain | ||
+ | acme.0.testmode integer 0 = disabled, 1 = enabled | ||
+ | |||
+ | # modems | ||
+ | modem.x.status | ||
+ | modem.x.trace.status integer 0 = disabled, 1 = enabled | ||
+ | modem.x.trace.adress address | ||
+ | modem.x.trace.targed address | ||
+ | modem.x.trace.netmask netmask | ||
+ | modem.x.trace.filesize | ||
+ | modem.x.trace.nr_files | ||
+ | modem.x.config.antennas | ||
+ | modem.x.config.idle_lte_attach | ||
+ | modem.x.config.silent_reset | ||
+ | modem.x.trace.urc.status | ||
+ | modem.x.query_interval.signal | ||
+ | modem.x.query_interval.operator | ||
+ | modem.x.config.silent_reset integer 0 = disabled, 1 = enabled send AT+CFUN=15 or not | ||
+ | |||
+ | # SIM cards | ||
+ | sim.x.pincode | ||
+ | sim.x.pukcode | ||
+ | sim.x.lai | ||
+ | sim.x.bands | ||
+ | sim.x.card | ||
+ | sim.x.pref | ||
+ | 3G-only, | ||
+ | 3G/ | ||
+ | |||
+ | sim.x.regmode | ||
+ | 1 = packet-switched, | ||
+ | 2 = all networks | ||
+ | |||
+ | # Soft SIMs | ||
+ | ssim.x.id | ||
+ | ssim.x.key | ||
+ | ssim.x.op | ||
+ | |||
+ | # WWAN Interfaces | ||
+ | wwan.x.status | ||
+ | wwan.x.card | ||
+ | wwan.x.sim | ||
+ | wwan.x.pdp | ||
+ | wwan.x.pref | ||
+ | 2G-only, | ||
+ | 2G-first, | ||
+ | 2G3G-only, | ||
+ | 3G-only, | ||
+ | 3G-first, | ||
+ | 4G-only, | ||
+ | 4G-first | ||
+ | |||
+ | wwan.x.autoconn integer (0 = disabled, 1 = enabled) | ||
+ | wwan.x.number | ||
+ | wwan.x.username | ||
+ | wwan.x.password | ||
+ | wwan.x.apn | ||
+ | |||
+ | wwan.x.auth | ||
+ | 2 = CHAP, 3 = PAP+CHAP | ||
+ | wwan.x.hdrcomp | ||
+ | wwan.x.softcomp | ||
+ | wwan.x.address | ||
+ | wwan.x.isdn | ||
+ | wwan.x.negdns | ||
+ | wwan.x.minrssi | ||
+ | wwan.x.minqual | ||
+ | wwan.x.maxfail | ||
+ | wwan.x.homeonly | ||
+ | wwan.x.maxattempts | ||
+ | wwan.x.mtu | ||
+ | wwan.x.protocoll_mode adresstype ipv4, | ||
+ | |||
+ | # USB | ||
+ | usb.status | ||
+ | usb.hotplug | ||
+ | usb.x.enabled | ||
+ | autorun.status | ||
+ | autorun.authdev | ||
+ | autorun.password password | ||
+ | |||
+ | usb.devices.x.dev | ||
+ | usb.devices.x.module | ||
+ | pegasus, | ||
+ | usb.devices.x.busid | ||
+ | |||
+ | |||
+ | # Bridges | ||
+ | network.br.x.mode | ||
+ | |||
+ | 2 = enabled with local Interface | ||
+ | network.br.x.mtu | ||
+ | network.br.x.address | ||
+ | network.br.x.netmask | ||
+ | network.br.x.gateway | ||
+ | network.br.x.proxyarp | ||
+ | network.br.x.mac | ||
+ | network.br.x.stp | ||
+ | network.br.x.rstp | ||
+ | # Ethernet | ||
+ | network.link.x.mode | ||
+ | 1 = 10baseT/ | ||
+ | 2 = 10baseT/ | ||
+ | 3 = 100baseT/ | ||
+ | 4 = 100baseT/ | ||
+ | 5 = 1000baseT/ | ||
+ | 6 = 1000baseT/ | ||
+ | |||
+ | # Ethernet Switch Ports | ||
+ | switch.port.x.status | ||
+ | switch.port.x.interface | ||
+ | |||
+ | # Ethernet Ports | ||
+ | ethernet.port.x.status | ||
+ | ethernet.port.x.interface | ||
+ | |||
+ | # Ethernet Briding | ||
+ | ethernet.bridge.firewall | ||
+ | ethernet.bridge.stp integer 0 = disabled, 1 = enabled Ethernet bridge STP | ||
+ | ethernet.bridge.rstp | ||
+ | |||
+ | #Serdes Configuration | ||
+ | ethernet.serdes integer | ||
+ | |||
+ | # WLAN | ||
+ | wlan.x.status | ||
+ | wlan.x.mode | ||
+ | wlan.x.diversity | ||
+ | wlan.x.regdom | ||
+ | wlan.x.antgain | ||
+ | wlan.x.txpower integer 20 dBm (max. EIRP) WLAN EIRP | ||
+ | wlan.x.settings.hwmode | ||
+ | wlan.x.settings.band | ||
+ | wlan.x.settings.channel | ||
+ | wlan.x.settings.scanchannels | ||
+ | wlan.x.settings.bandwidth | ||
+ | wlan.x.settings.sgi | ||
+ | wlan.x.settings.outdoor | ||
+ | wlan.x.settings.sticky | ||
+ | wlan.x.settings.newbssidcalc | ||
+ | wlan.x.settings.tracking.status | ||
+ | wlan.x.settings.tracking.count | ||
+ | wlan.x.ac.0.host | ||
+ | wlan.x.ac.1.host | ||
+ | wlan.o.swencrypt integer | ||
+ | |||
+ | # WLAN Clients | ||
+ | wlan.x.client.y.ssid | ||
+ | wlan.x.client.y.secmode | ||
+ | wpa-radius, | ||
+ | |||
+ | wlan.x.client.y.secproto | ||
+ | |||
+ | |||
+ | wlan.x.client.y.cipher | ||
+ | wlan.x.client.y.sslciphers | ||
+ | wlan.x.client.y.psk | ||
+ | wlan.x.client.y.minrssi | ||
+ | wlan.x.client.y.minqual | ||
+ | wlan.x.client.y.id | ||
+ | wlan.x.client.y.prio | ||
+ | wlan.x.client.y.pmf | ||
+ | wlan.x.client.y.tlsv | ||
+ | wlan.x.client.y.ft | ||
+ | wlan.x.client.y.scan.bg.threshold | ||
+ | wlan.x.client.y.scan.bg.longinterval | ||
+ | wlan.x.client.y.scan.bg.shortinterval | ||
+ | |||
+ | # WLAN Access Points | ||
+ | wlan.x.vss.y.status | ||
+ | wlan.x.vss.y.ssid | ||
+ | wlan.x.vss.y.hidden | ||
+ | wlan.x.vss.y.isolate | ||
+ | wlan.x.vss.y.advertise | ||
+ | wlan.x.vss.y.inactivity | ||
+ | wlan.x.vss.y.secmode | ||
+ | wlan.x.vss.y.secproto | ||
+ | wlan.x.vss.y.cipher | ||
+ | wlan.x.vss.y.psk | ||
+ | wlan.x.vss.y.acct | ||
+ | wlan.x.vss.y.pmf | ||
+ | wlan.x.vss.y.addr4 | ||
+ | wlan.x.vss.y.iapp | ||
+ | wlan.x.vss.y.preauth | ||
+ | wlan.x.vss.y.fast.status | ||
+ | wlan.x.vss.y.fast.mobility | ||
+ | wlan.x.vss.y.fast.only | ||
+ | wlan.x.vss.y.fast.key | ||
+ | wlan.x.vss.y.bandsteering | ||
+ | wlan.x.vss.y.owe.transition | ||
+ | |||
+ | |||
+ | #Mesh | ||
+ | wlan.x.mesh.y.status integer | ||
+ | wlan.x.mesh.y.meshid | ||
+ | wlan.x.mesh.y.secmode | ||
+ | wlan.x.mesh.y.psk | ||
+ | wlan.x.mesh.y.pmf integer | ||
+ | wlan.x.mesh.y.gate integer | ||
+ | |||
+ | # Bluetooth | ||
+ | bluez.x.status | ||
+ | |||
+ | # CAN | ||
+ | can.x.status | ||
+ | can.x.bitrate | ||
+ | can.x.termination integer | ||
+ | |||
+ | #CLI-PHP | ||
+ | cliphp.status integer | ||
+ | |||
+ | # VLAN | ||
+ | network.vlan.x.interface | ||
+ | network.vlan.x.mode | ||
+ | network.vlan.x.index | ||
+ | network.vlan.x.id | ||
+ | network.vlan.x.prio | ||
+ | 0 = background, | ||
+ | 1 = best-effort, | ||
+ | 2 = excellent-effort, | ||
+ | 3 = critical-applications, | ||
+ | 4 = video, | ||
+ | 5 = voice, | ||
+ | 6 = internetwork-control, | ||
+ | 7 = network-control | ||
+ | network.vlan.x.brdev | ||
+ | |||
+ | # LAN Interfaces (IP) | ||
+ | network.lan.x.mode | ||
+ | network.lan.x.address | ||
+ | network.lan.x.netmask | ||
+ | network.lan.x.mtu | ||
+ | network.lan.x.alias.y.address | ||
+ | network.lan.x.alias.y.netmask | ||
+ | network.lan.x.proxyarp | ||
+ | network.lan.mac | ||
+ | network.lan.stp | ||
+ | |||
+ | # WLAN Interfaces (IP) | ||
+ | network.wlan.x.mode | ||
+ | network.wlan.x.mtu | ||
+ | network.wlan.x.address | ||
+ | network.wlan.x.netmask | ||
+ | network.wlan.x.gateway | ||
+ | network.wlan.x.brdev | ||
+ | network.wlan.x.proxyarp | ||
+ | |||
+ | # WAN Interfaces (IP) | ||
+ | network.wan.x.interface | ||
+ | network.wan.x.mode | ||
+ | network.wan.x.address | ||
+ | network.wan.x.netmask | ||
+ | network.wan.x.gateway | ||
+ | network.wan.x.dns0 | ||
+ | network.wan.x.dns1 | ||
+ | network.wan.x.mac adress | ||
+ | network.wan.x.username | ||
+ | network.wan.x.password | ||
+ | network.wan.x.service | ||
+ | network.wan.x.ac | ||
+ | network.wan.x.ipv6.mode | ||
+ | network.wan.x.ipv6.adress | ||
+ | network.wan.x.ipv6.prefix_length | ||
+ | network.wan.x.mtu | ||
+ | |||
+ | # DNS | ||
+ | network.dns.status | ||
+ | network.dns.domain | ||
+ | network.dns.server0 | ||
+ | network.dns.server1 | ||
+ | |||
+ | # DNS Static Hosts | ||
+ | network.dns.hosts.0.name | ||
+ | network.dns.hosts.0.address | ||
+ | |||
+ | # DHCP | ||
+ | network.dhcp.x.mode | ||
+ | network.dhcp.x.start | ||
+ | network.dhcp.x.end | ||
+ | network.dhcp.x.ttl | ||
+ | network.dhcp.x.relay | ||
+ | network.dhcp.x.relay2 | ||
+ | network.dhcp.x.perst | ||
+ | network.dhcp.x.ignore | ||
+ | network.dhcp.x.gateway | ||
+ | network.dhcp.x.agent | ||
+ | network.dhcp.x.dns0 | ||
+ | network.dhcp.x.dns1 | ||
+ | network.dhcp.x.wins0 | ||
+ | network.dhcp.x.wins1 | ||
+ | |||
+ | # DHCP Static Hosts | ||
+ | network.dhcp.hosts.x.interface | ||
+ | network.dhcp.hosts.x.address | ||
+ | network.dhcp.hosts.x.mac | ||
+ | network.dhcp.hosts.x.port | ||
+ | network.dhcp.hosts.x.name | ||
+ | network.dhcp.x.options.y.key | ||
+ | network.dhcp.x.options.y.value | ||
+ | |||
+ | # NTP | ||
+ | network.ntp.status | ||
+ | network.ntp.server0 | ||
+ | network.ntp.server1 | ||
+ | network.ntp.preferred integer | ||
+ | network.ntp.ping | ||
+ | network.ntp.interval | ||
+ | network.ntp.gpstime | ||
+ | network.ntp.stratum integer | ||
+ | network.ntp.maxdistance | ||
+ | network.ntp.access.x.address | ||
+ | network.ntp.access.x.netmask | ||
+ | |||
+ | # WAN links | ||
+ | wanlink.0.mode | ||
+ | 2 = on switchover, 3 = distributed | ||
+ | wanlink.0.multipath | ||
+ | wanlink.0.name | ||
+ | wanlink.0.prio | ||
+ | wanlink.0.weight | ||
+ | wanlink.0.switchback | ||
+ | wanlink.0.suspend | ||
+ | wanlink.0.options | ||
+ | wanlink.0.brdev | ||
+ | wanlink.x.threshold.dial | ||
+ | wanlink.0.passthru.interface | ||
+ | wanlink.0.passthru.network | ||
+ | wanlink.0.passthru.netmask | ||
+ | |||
+ | # QoS | ||
+ | qos.status | ||
+ | |||
+ | qos.interface.x.name | ||
+ | qos.interface.x.cong | ||
+ | qos.interface.x.type | ||
+ | qos.interface.x.uprate | ||
+ | qos.interface.x.downrate | ||
+ | qos.interface.x.pingip.primary | ||
+ | qos.interface.x.pingip.secondary address | ||
+ | |||
+ | qos.queue.0.desc | ||
+ | regex: 0-9, | ||
+ | qos.queue.0.direction | ||
+ | qos.queue.0.limit | ||
+ | qos.queue.0.interface | ||
+ | qos.queue.0.prio | ||
+ | qos.queue.0.tos | ||
+ | 0 = normal-service, | ||
+ | 2 = minimize-cost, | ||
+ | 4 = maximize-reliability, | ||
+ | 8 = maximize-throughput, | ||
+ | 16 = minimize-delay | ||
+ | |||
+ | qos.service.0.queue | ||
+ | qos.service.0.saddress | ||
+ | qos.service.0.snetmask | ||
+ | qos.service.0.sport | ||
+ | qos.service.0.daddress | ||
+ | qos.service.0.dnetmask | ||
+ | qos.service.0.dport | ||
+ | qos.service.0.proto | ||
+ | qos.service.0.tos | ||
+ | 0 = normal-service, | ||
+ | 2 = minimize-cost | ||
+ | 4 = maximize-reliability, | ||
+ | 8 = maximize-throughput, | ||
+ | 16 = minimize-delay | ||
+ | |||
+ | # Mobile IP | ||
+ | mobileip.x.status | ||
+ | mobileip.x.mode | ||
+ | 1 = mobile-node, | ||
+ | 2 = home-agent | ||
+ | # Mobile IP (mobile-node) | ||
+ | mobileip.x.homeAgentAddress0 | ||
+ | mobileip.x.homeAgentAddress1 | ||
+ | mobileip.x.homeAddress | ||
+ | mobileip.x.spi | ||
+ | mobileip.x.sharedSecret | ||
+ | mobileip.x.sharedSecretEncoding | ||
+ | mobileip.x.authenticationType | ||
+ | mobileip.x.lifeTime | ||
+ | mobileip.x.mtu | ||
+ | mobileip.x.udpEncapsulation | ||
+ | mobileip.x.mobileNetworkAddress | ||
+ | mobileip.x.mobileNetworkMask | ||
+ | |||
+ | mobileip.registrationBaseTimeout | ||
+ | mobileip.registrationRetriesPerHomeAgent integer | ||
+ | mobileip.connectivityLossRetryTimeout | ||
+ | mobileip.maxTimestampDelta | ||
+ | mobileip.maxConsecutiveKeepaliveFailures integer | ||
+ | mobileip.minimalisticKeepalive | ||
+ | |||
+ | # Mobile IP (home-agent) | ||
+ | mobileip.x.homeNetworkAddress | ||
+ | mobileip.x.homeNetworkMask | ||
+ | |||
+ | mobileip.x.node.y.spi | ||
+ | mobileip.x.node.y.sharedSecret | ||
+ | mobileip.x.node.y.sharedSecretEncoding | ||
+ | mobileip.x.node.y.authenticationType | ||
+ | |||
+ | |||
+ | # OpenVPN | ||
+ | openvpn.status | ||
+ | openvpn.restartonlinkchange | ||
+ | openvpn.mptcp.status | ||
+ | |||
+ | openvpn.tunnel.x.mode | ||
+ | 1 = client (standard), | ||
+ | 2 = server (standard), | ||
+ | 3 = client (expert), | ||
+ | 4 = server (expert) | ||
+ | |||
+ | openvpn.tunnel.x.peermode | ||
+ | openvpn.tunnel.x.server | ||
+ | openvpn.tunnel.x.port | ||
+ | openvpn.tunnel.x.server2 | ||
+ | openvpn.tunnel.x.port2 | ||
+ | openvpn.tunnel.x.auth | ||
+ | 1 = credential-based, | ||
+ | 2 = none, | ||
+ | 3 = both | ||
+ | openvpn.tunnel.x.type | ||
+ | openvpn.tunnel.x.proto | ||
+ | openvpn.tunnel.x.comp | ||
+ | openvpn.tunnel.x.username | ||
+ | openvpn.tunnel.x.password | ||
+ | openvpn.tunnel.x.brdev | ||
+ | openvpn.tunnel.x.cipher | ||
+ | none = none, | ||
+ | AES-128-CBC, | ||
+ | AES-128-CFB, | ||
+ | AES-128-CFB1, | ||
+ | AES-128-CFB8, | ||
+ | AES-128-GCM, | ||
+ | AES-128-OFB, | ||
+ | AES-192-CBC, | ||
+ | AES-192-CFB, | ||
+ | AES-192-CFB1, | ||
+ | AES-192-CFB8, | ||
+ | AES-192-GCM, | ||
+ | AES-192-OFB, | ||
+ | AES-256-CBC, | ||
+ | AES-256-CFB, | ||
+ | AES-256-CFB1, | ||
+ | AES-256-CFB8, | ||
+ | AES-256-GCM, | ||
+ | AES-256-OFB, | ||
+ | ARIA-128-CBC, | ||
+ | ARIA-128-CFB, | ||
+ | ARIA-128-CFB1, | ||
+ | ARIA-128-CFB8, | ||
+ | ARIA-128-GCM, | ||
+ | ARIA-128-OFB, | ||
+ | ARIA-192-CBC, | ||
+ | ARIA-192-CFB, | ||
+ | ARIA-192-CFB1, | ||
+ | ARIA-192-CFB8, | ||
+ | ARIA-192-GCM, | ||
+ | ARIA-192-OFB, | ||
+ | ARIA-256-CBC, | ||
+ | ARIA-256-CFB, | ||
+ | ARIA-256-CFB1, | ||
+ | ARIA-256-CFB8, | ||
+ | ARIA-256-GCM, | ||
+ | ARIA-256-OFB, | ||
+ | CAMELLIA-128-CBC, | ||
+ | CAMELLIA-128-CFB, | ||
+ | CAMELLIA-128-CFB1, | ||
+ | CAMELLIA-128-CFB8, | ||
+ | CAMELLIA-128-OFB, | ||
+ | CAMELLIA-192-CBC, | ||
+ | CAMELLIA-192-CFB, | ||
+ | CAMELLIA-192-CFB1, | ||
+ | CAMELLIA-192-CFB8, | ||
+ | CAMELLIA-192-OFB, | ||
+ | CAMELLIA-256-CBC, | ||
+ | CAMELLIA-256-CFB, | ||
+ | CAMELLIA-256-CFB1, | ||
+ | CAMELLIA-256-CFB8, | ||
+ | CAMELLIA-256-OFB, | ||
+ | SEED-CBC, | ||
+ | SEED-CFB, | ||
+ | SEED-OFB, | ||
+ | SM4-CBC, | ||
+ | SM4-CFB, | ||
+ | SM4-OFB, | ||
+ | BF-CBC, | ||
+ | BF-CFB, | ||
+ | BF-OFB, | ||
+ | CAST5-CBC, | ||
+ | CAST5-CFB, | ||
+ | CAST5-OFB, | ||
+ | DES-CBC, | ||
+ | DES-CFB, | ||
+ | DES-CFB1, | ||
+ | DES-CFB8, | ||
+ | DES-EDE-CBC, | ||
+ | DES-EDE-CFB, | ||
+ | DES-EDE-OFB, | ||
+ | DES-EDE3-CBC, | ||
+ | DES-EDE3-CFB, | ||
+ | DES-EDE3-CFB1, | ||
+ | DES-EDE3-CFB8, | ||
+ | DES-EDE3-OFB, | ||
+ | DES-OFB, | ||
+ | DESX-CBC, | ||
+ | IDEA-CBC, | ||
+ | IDEA-CFB, | ||
+ | IDEA-OFB, | ||
+ | RC2-40-CBC, | ||
+ | RC2-64-CBC, | ||
+ | RC2-CBC, | ||
+ | RC2-CFB, | ||
+ | RC2-OFB | ||
+ | |||
+ | openvpn.tunnel.x.digest | ||
+ | MD5, | ||
+ | RSA-MD5, | ||
+ | SHA1, | ||
+ | RSA-SHA1, | ||
+ | MDC2, | ||
+ | RSA-MDC2, | ||
+ | MD5-Sha1, | ||
+ | RSA-SHA1-2, | ||
+ | RIPEMD160, | ||
+ | RSA-RIPEMD160, | ||
+ | MD4, | ||
+ | RSA-MD4, | ||
+ | ecdsa-with-SHA1, | ||
+ | RSA-SHA256, | ||
+ | RSA-SHA384, | ||
+ | RSA-SHA512, | ||
+ | RSA-SHA224, | ||
+ | SHA256, | ||
+ | SHA384, | ||
+ | SHA512, | ||
+ | SHA224, | ||
+ | whirlpool, | ||
+ | BLAKE2B512, | ||
+ | BLAKE2S256, | ||
+ | SHA512-224, | ||
+ | SHA512-256, | ||
+ | SHA3-224, | ||
+ | SHA3-256, | ||
+ | SHA3-384, | ||
+ | SHA3-512, | ||
+ | SHAKE128, | ||
+ | SHAKE256, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-244, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-256, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-384, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-512, | ||
+ | SM3, | ||
+ | RSA-SM3, | ||
+ | RSA-SHA512/ | ||
+ | RSA-SHA512/ | ||
+ | |||
+ | openvpn.tunnel.x.keepalive | ||
+ | openvpn.tunnel.x.redirgw | ||
+ | openvpn.tunnel.x.negdns | ||
+ | openvpn.tunnel.x.usecrl | ||
+ | openvpn.tunnel.x.fragment | ||
+ | openvpn.tunnel.x.mtu | ||
+ | openvpn.tunnel.x.duplicates | ||
+ | openvpn.tunnel.x.serverpushed integer | ||
+ | |||
+ | #OpenVPN routes | ||
+ | openvpn.server.network.address | ||
+ | openvpn.server.network.netmask | ||
+ | openvpn.server.route.allclients integer | ||
+ | openvpn.server.route.x.network | ||
+ | openvpn.server.route.x.netmask | ||
+ | |||
+ | openvpn.server.client.x.status | ||
+ | openvpn.server.client.x.desc | ||
+ | openvpn.server.client.x.address address | ||
+ | |||
+ | openvpn.server.client.network.x.client | ||
+ | openvpn.server.client.network.x.network address | ||
+ | openvpn.server.client.network.x.netmask address | ||
+ | |||
+ | # IPsec | ||
+ | ipsec.status | ||
+ | ipsec.ike.nattraversal | ||
+ | ipsec.makebeforebreak integer 0 = disable, | ||
+ | ipsec.restartonlinkchange | ||
+ | |||
+ | ipsec.0.status integer 0 = disabled, 1 = enabled | ||
+ | ipsec.0.crlfetcher.enable integer 0 = disable, 1 = enable IPsec config mode | ||
+ | ipsec.0.local.ip address IPsec tunnel local | ||
+ | ipsec.x.remote.serverIp | ||
+ | ipsec.x.mode | ||
+ | ipsec.x.ike.auth | ||
+ | pki = public key infrastructure, | ||
+ | xauth = extended authentication | ||
+ | ipsec.x.ike.psk | ||
+ | ipsec.x.ike.keyexchange | ||
+ | ipsec.x.ike.username | ||
+ | ipsec.x.ike.userpass | ||
+ | ipsec.x.ike.groupname | ||
+ | ipsec.x.ike.grouppass | ||
+ | ipsec.x.ike.mode | ||
+ | ipsec.x.ike.encryption | ||
+ | aes128, | ||
+ | aes192, | ||
+ | selected> | ||
+ | blowfish128, | ||
+ | blowfish192, | ||
+ | blowfish256, | ||
+ | aescmac, | ||
+ | aes128ctr, | ||
+ | aes192ctr, | ||
+ | aes256ctr, | ||
+ | aes128gcm12, | ||
+ | aes192gcm12, | ||
+ | aes256gcm12, | ||
+ | aes128gcm16, | ||
+ | aes192gcm16, | ||
+ | aes256gcm16, | ||
+ | aes128gcm64, | ||
+ | aes192gcm64, | ||
+ | aes256gcm64, | ||
+ | aes128gcm96, | ||
+ | aes192gcm96, | ||
+ | aes256gcm96, | ||
+ | aes128gcm128, | ||
+ | aes192gcm128, | ||
+ | aes256gcm128, | ||
+ | |||
+ | ipsec.x.ike.hash | ||
+ | ipsec.x.ike.dh | ||
+ | modp1536, | ||
+ | modp2048, | ||
+ | modp3072, | ||
+ | modp4096, | ||
+ | modp6144, | ||
+ | modp8192, | ||
+ | ecp256, | ||
+ | ecp384, | ||
+ | ecp521, | ||
+ | modp2048s256, | ||
+ | ecp256bp, | ||
+ | ecp384bp, | ||
+ | ecp512bp, | ||
+ | |||
+ | ipsec.x.ike.localId | ||
+ | localIPtype=USER_FQDN: | ||
+ | localIPtype=else : passwd format | ||
+ | |||
+ | ipsec.x.ike.localIdType | ||
+ | ipsec.x.ike.remoteId | ||
+ | remoteIPtype=USER_FQDN: | ||
+ | remoteIPtype=else : passwd format | ||
+ | ipsec.x.ike.remoteIdType | ||
+ | ipsec.x.ike.lifetime | ||
+ | ipsec.x.ike.prf | ||
+ | aesxcbc, | ||
+ | ipsec.x.esp.encryption | ||
+ | aes128, | ||
+ | aes192, | ||
+ | aes256, | ||
+ | blowfish128, | ||
+ | blowfish192, | ||
+ | blowfish256, | ||
+ | aescmac, | ||
+ | aes128ctr, | ||
+ | aes192ctr, | ||
+ | aes256ctr, | ||
+ | aes128gcm12, | ||
+ | aes192gcm12, | ||
+ | aes256gcm12, | ||
+ | aes128gcm16, | ||
+ | aes192gcm16, | ||
+ | aes256gcm16, | ||
+ | aes128gcm64, | ||
+ | aes192gcm64, | ||
+ | aes256gcm64, | ||
+ | aes128gcm96, | ||
+ | aes192gcm96, | ||
+ | aes256gcm96, | ||
+ | aes128gcm128, | ||
+ | aes192gcm128, | ||
+ | aes256gcm128, | ||
+ | |||
+ | ipsec.x.esp.hash | ||
+ | ipsec.x.esp.lifetime | ||
+ | ipsec.x.esp.pfs | ||
+ | ipsec.x.esp.pfsgroup | ||
+ | modp1024, | ||
+ | modp1536, | ||
+ | modp2048, | ||
+ | modp3072, | ||
+ | modp4096, | ||
+ | modp6144, | ||
+ | modp8192, | ||
+ | modp1024s160, | ||
+ | modp2048s224, | ||
+ | modp2048s256, | ||
+ | ecp192, | ||
+ | ecp224, | ||
+ | ecp256, | ||
+ | ecp384, | ||
+ | ecp521, | ||
+ | ecp224bp, | ||
+ | ecp256bp, | ||
+ | ecp384bp, | ||
+ | ecp512bp | ||
+ | ipsec.x.esp.forceencaps | ||
+ | ipsec.x.dpd.status | ||
+ | ipsec.x.dpd.cycle | ||
+ | ipsec.x.dpd.failure | ||
+ | ipsec.x.dpd.action | ||
+ | |||
+ | ipsec.x.local.y.lanAddress | ||
+ | ipsec.x.local.y.lanMask | ||
+ | ipsec.x.local.y.natAddress | ||
+ | ipsec.x.remote.y.lanAddress | ||
+ | ipsec.x.remote.y.lanMask | ||
+ | |||
+ | ipsec.server.client.x.status | ||
+ | ipsec.server.client.x.desc | ||
+ | |||
+ | # GRE | ||
+ | gre.status | ||
+ | |||
+ | gre.tunnel.x.mode | ||
+ | gre.tunnel.x.type | ||
+ | gre.tunnel.x.peer | ||
+ | gre.tunnel.x.local.address | ||
+ | gre.tunnel.x.local.netmask | ||
+ | gre.tunnel.x.remote.network | ||
+ | gre.tunnel.x.remote.netmask | ||
+ | gre.tunnel.x.brdev | ||
+ | gre.tunnel.x.key integer range 0...2147483647 GRE tunnel key | ||
+ | |||
+ | |||
+ | # PPTP | ||
+ | pptp.status | ||
+ | |||
+ | pptp.server.listen | ||
+ | pptp.server.address | ||
+ | pptp.server.start | ||
+ | pptp.server.end | ||
+ | pptp.server.client.x.username | ||
+ | pptp.server.client.x.password | ||
+ | username and password must not contain apostrophes and double apostrophes (also not empty) | ||
+ | |||
+ | pptp.server.client.x.address | ||
+ | |||
+ | pptp.tunnel.x.mode | ||
+ | pptp.tunnel.x.address | ||
+ | pptp.tunnel.x.username | ||
+ | | ||
+ | pptp.tunnel.x.password | ||
+ | | ||
+ | #VLAN | ||
+ | vxlan.x.status | ||
+ | vxlan.x.id | ||
+ | vxlan.x.remote | ||
+ | vxlan.x.dport | ||
+ | vxlan.x.local | ||
+ | vxlan.x.brdev | ||
+ | |||
+ | #L2TP | ||
+ | l2tp.tunnel.x.status integer disabled = 0, enabled = 1 | ||
+ | l2tp.tunnel.x.encap protocol IP, | ||
+ | l2tp.tunnel.x.local.local.address address IP im Standardformat | ||
+ | l2tp.tunnel.x.local.local.tunid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.local.local.sessionid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.local.udp_port integer 1...65535 | ||
+ | l2tp.tunnel.x.local.cookie hex länge nicht 0,8,16 | ||
+ | l2tp.tunnel.x.remote.address address IP im Standardformat | ||
+ | l2tp.tunnel.x.remote.tunid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.remote.sessionid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.remote.udp_port integer 1...65535 | ||
+ | l2tp.tunnel.x.remote.cookie hex länge nicht 0,8,16 | ||
+ | l2tp.tunnel.x.brdev enum LANx, | ||
+ | l2tp.tunnel.x.mtu integer 1...9000 | ||
+ | |||
+ | # Dial-In | ||
+ | dialin.status | ||
+ | dialin.device | ||
+ | dialin.address.start | ||
+ | dialin.address.size | ||
+ | |||
+ | # Firewall | ||
+ | firewall.status | ||
+ | |||
+ | firewall.group.x.desc | ||
+ | firewall.group.x.addr.y.address address | ||
+ | firewall.group.x.addr.y.netmask address | ||
+ | firewall.group.x.port.y.port | ||
+ | |||
+ | firewall.rule.x.mode | ||
+ | firewall.rule.x.log | ||
+ | firewall.rule.x.desc | ||
+ | firewall.rule.x.interface | ||
+ | firewall.rule.x.source | ||
+ | firewall.rule.x.netmask | ||
+ | firewall.rule.x.protocol | ||
+ | 4 = ESP, 5 = GRE, 6 = OSPF | ||
+ | firewall.rule.x.startPort | ||
+ | firewall.rule.x.endPort | ||
+ | firewall.rule.x.tinterface | ||
+ | firewall.rule.x.target | ||
+ | firewall.rule.x.tnetmask | ||
+ | firewall.rule.x.mac | ||
+ | |||
+ | # NAPT | ||
+ | napt.x.interface | ||
+ | napt.x.intHost | ||
+ | napt.x.intMask | ||
+ | |||
+ | napt.conntrack.udp.timeout integer | ||
+ | napt.conntrack.udp.streamtimeout integer | ||
+ | |||
+ | # NAPT Inbound Rule | ||
+ | napt.rule.x.status | ||
+ | napt.rule.x.desc | ||
+ | |||
+ | napt.rule.x.direction | ||
+ | napt.rule.x.extHost | ||
+ | napt.rule.x.extMask | ||
+ | napt.rule.x.extInterface | ||
+ | napt.rule.x.extPort.start | ||
+ | napt.rule.x.extPort.end | ||
+ | napt.rule.x.protocol | ||
+ | x 3 = ESP, 4 = GRE | ||
+ | napt.rule.x.remNetwork | ||
+ | napt.rule.x.remNetmask | ||
+ | napt.rule.x.intHost | ||
+ | napt.rule.x.intMask | ||
+ | napt.rule.x.intPort | ||
+ | napt.rule.x.srcPort.start | ||
+ | napt.rule.x.srcPort.end | ||
+ | napt.rule.x.dstPort.start | ||
+ | napt.rule.x.dstPort.end | ||
+ | |||
+ | # NAPT Outbound Rule | ||
+ | napt.rule.y.status | ||
+ | napt.rule.y.desc | ||
+ | |||
+ | napt.rule.y.direction | ||
+ | napt.rule.y.extHost | ||
+ | napt.rule.y.extMask | ||
+ | napt.rule.y.extInterface | ||
+ | napt.rule.y.extPort.start | ||
+ | napt.rule.y.extPort.end | ||
+ | napt.rule.y.protocol | ||
+ | 3 = ESP, 4 = GRE | ||
+ | napt.rule.y.remNetwork | ||
+ | napt.rule.y.remNetmask | ||
+ | napt.rule.y.intHost | ||
+ | napt.rule.y.intMask | ||
+ | napt.rule.y.intPort | ||
+ | |||
+ | # DynDNS | ||
+ | ddns.status | ||
+ | |||
+ | ddns.service.x.provider | ||
+ | changeip.com, | ||
+ | duckdns.org, | ||
+ | no-ip.com, | ||
+ | zoneedit.com, | ||
+ | afraid.org, | ||
+ | selfhost.de, | ||
+ | easydns.com, | ||
+ | namecheap.com, | ||
+ | 3322.org, | ||
+ | ovh.com, | ||
+ | dnsexit.com, | ||
+ | dnsdynamic.org, | ||
+ | dnsomatic.com, | ||
+ | he.net, | ||
+ | dnsmax.com, | ||
+ | gnudip, | ||
+ | rfc2136, | ||
+ | router, | ||
+ | custom | ||
+ | ddns.service.x.source | ||
+ | ifc = use outgoing interface address, | ||
+ | auto = query CheckIP service | ||
+ | ddns.service.x.address | ||
+ | ddns.service.x.port | ||
+ | ddns.service.x.hostname | ||
+ | ddns.service.x.username | ||
+ | ddns.service.x.password | ||
+ | ddns.service.x.proto | ||
+ | ddns.service.x.url | ||
+ | ddns.service.x.keyname | ||
+ | ddns.service.x.key | ||
+ | |||
+ | ddns.server.status | ||
+ | |||
+ | # WAN Supervision | ||
+ | surveyor.ping.status | ||
+ | surveyor.ping.x.wanlink | ||
+ | surveyor.ping.x.mode | ||
+ | 2 = only validate if link is up | ||
+ | surveyor.ping.x.primary | ||
+ | surveyor.ping.x.secondary | ||
+ | surveyor.ping.x.interval | ||
+ | surveyor.ping.x.retry | ||
+ | surveyor.ping.x.timeout | ||
+ | surveyor.ping.x.maxfailures | ||
+ | surveyor.ping.x.maxdowntime | ||
+ | surveyor.ping.x.action | ||
+ | |||
+ | # GNSS Supervision | ||
+ | surveyor.gnss.status | ||
+ | surveyor.gnss.mode | ||
+ | 1 = validate NMEA stream, | ||
+ | 2 = validate GPS fix | ||
+ | surveyor.gnss.maxdowntime | ||
+ | surveyor.gnss.action | ||
+ | surveyor.gnss.maxflaps | ||
+ | |||
+ | # Ignition supervision | ||
+ | surveyor.ignition.status | ||
+ | surveyor.ignition.hold | ||
+ | surveyor.ignition.shutdown integer | ||
+ | |||
+ | # Voice | ||
+ | voice.status | ||
+ | voice.routing | ||
+ | |||
+ | voice.sip.status | ||
+ | voice.sip.interface | ||
+ | voice.sip.port | ||
+ | voice.sip.expires | ||
+ | voice.fxs.status integer | ||
+ | voice.fxs.pass | ||
+ | |||
+ | voice.endpoint.x.type | ||
+ | sip = SIP (registrar), | ||
+ | directsip = SIP (direct), | ||
+ | useragentsip = SIP (user-agent), | ||
+ | aud = Audio, | ||
+ | nil = Nil-Device | ||
+ | voice.endpoint.x.desc | ||
+ | voice.endpoint.x.device | ||
+ | voice.endpoint.x.profile | ||
+ | | ||
+ | voice.endpoint.x.volume | ||
+ | voice.endpoint.x.host | ||
+ | voice.endpoint.x.port | ||
+ | voice.endpoint.x.domain | ||
+ | voice.endpoint.x.subscriber | ||
+ | voice.endpoint.x.username | ||
+ | voice.endpoint.x.password | ||
+ | voice.endpoint.x.options | ||
+ | |||
+ | voice.endpoint.x.register.enabled | ||
+ | voice.endpoint.x.register.subscriber | ||
+ | voice.endpoint.x.register.expires | ||
+ | |||
+ | voice.route.x.mode | ||
+ | voice.route.x.source | ||
+ | voice.route.x.dest | ||
+ | |||
+ | # SNMP | ||
+ | snmp.status | ||
+ | snmp.mode | ||
+ | snmp.engine.id hex 12 < id(Zeichen) < 64 SNMP engineID | ||
+ | snmp.port | ||
+ | snmp.community | ||
+ | snmp.contact | ||
+ | snmp.location | ||
+ | snmp.auth | ||
+ | snmp.enc | ||
+ | snmp.admin.community | ||
+ | snmp.admin.host | ||
+ | |||
+ | # LwM2M | ||
+ | lwm2m.status | ||
+ | lwm2m.agent.x.server | ||
+ | lwm2m.agent.x.bootstrap | ||
+ | lwm2m.agent.x.security | ||
+ | lwm2m.agent.x.id | ||
+ | lwm2m.agent.x.key | ||
+ | lwm2m.endpoint | ||
+ | lwm2m.agent.x.lifetime integer | ||
+ | |||
+ | #ITxPT | ||
+ | itxpt.status | ||
+ | itxpt.network.interface | ||
+ | itxpt.fmstoip.enabled | ||
+ | itxpt.fmstoip.period | ||
+ | itxpt.fmstoip.can.interface | ||
+ | itxpt.fmstoip.can.db.extensions | ||
+ | itxpt.fmstoip.can.db.dl.path | ||
+ | itxpt.fmstoip.can.db.dl.selection | ||
+ | itxpt.fmstoip.can.db.manufacturer.file | ||
+ | itxpt.fmstoip.can.db.manufacturer.selected | ||
+ | itxpt.gnss.enabled | ||
+ | itxpt.vtoip.enabled | ||
+ | itxpt.time.enabled | ||
+ | itxpt.mqtt.enabled | ||
+ | |||
+ | # GNSS | ||
+ | gpsd.x.status | ||
+ | gpsd.x.mode | ||
+ | gpsd.x.atype | ||
+ | gpsd.x.interval | ||
+ | gpsd.x.accuracy | ||
+ | gpsd.x.supl | ||
+ | gpsd.x.apn | ||
+ | gpsd.x.port | ||
+ | gpsd.x.cmode | ||
+ | 1 = raw, | ||
+ | 2 = super-raw, | ||
+ | 3 = json | ||
+ | gpsd.x.allowed | ||
+ | gpsd.x.maxdist | ||
+ | 1..10000 meter | ||
+ | gpsd.x.ftimeout | ||
+ | 1..300 seconds | ||
+ | |||
+ | |||
+ | gpsd.x.modifynmea integer | ||
+ | gpsd.x.dr.eabled integer | ||
+ | gpsd.x.cfg.yaw | ||
+ | gpsd.x.cfg.pitch | ||
+ | gpsd.x.cfg.roll | ||
+ | gspd.x.cfg.vrp2antenna.a | ||
+ | gspd.x.cfg.vrp2antenna.b | ||
+ | gspd.x.cfg.vrp2antenna.c | ||
+ | gpsd.x.cfg.vrp2imu.a | ||
+ | gpsd.x.cfg.vrp2imu.b | ||
+ | gpsd.x.cfg.vrp2imu.c | ||
+ | gpsd.x.assisturl0 | ||
+ | gpsd.x.assisturl1 | ||
+ | gpsd.x.dr.ignition integer | ||
+ | |||
+ | # DIO | ||
+ | dio.out1 | ||
+ | dio.out2 | ||
+ | |||
+ | # Administration | ||
+ | admin.password | ||
+ | admin.store_pw integer | ||
+ | admin.hash | ||
+ | admin.bootpass | ||
+ | admin.shell | ||
+ | admincliphp integer | ||
+ | admin.access | ||
+ | 1 = authentication required, | ||
+ | 2 = secure authentication required, | ||
+ | 3 = secure authentication preferred | ||
+ | |||
+ | admin.debug | ||
+ | admin.area | ||
+ | |||
+ | # Logging | ||
+ | syslog.storage | ||
+ | syslog.redirect | ||
+ | syslog.filesize | ||
+ | |||
+ | # LEDs | ||
+ | led.mode | ||
+ | 1 = left/ | ||
+ | 2 = both (toggle mode) | ||
+ | |||
+ | |||
+ | led.x.left | ||
+ | led.x.right | ||
+ | |||
+ | # reboot | ||
+ | reboot.delay | ||
+ | |||
+ | # Users | ||
+ | user.x.name | ||
+ | user.x.role | ||
+ | user.x.password | ||
+ | user.x.store_pw integer | ||
+ | user.x.hash | ||
+ | user.x.desc | ||
+ | user.x.shell | ||
+ | user.x.cliphap integer | ||
+ | |||
+ | |||
+ | # Remote Authentication | ||
+ | radius.status | ||
+ | radius.mode | ||
+ | 1 = use for login | ||
+ | radius.server | ||
+ | radius.server2 | ||
+ | radius.secret | ||
+ | radius.secret2 | ||
+ | radius.authport | ||
+ | radius.authport2 | ||
+ | radius.acctport | ||
+ | radius.acctport2 | ||
+ | |||
+ | |||
+ | # SMS daemon | ||
+ | smsd.status | ||
+ | smsd.report | ||
+ | smsd.x.burst | ||
+ | smsd.x.device | ||
+ | smsd.x.gateway | ||
+ | |||
+ | smsd.rule.outgoing.x.number | ||
+ | smsd.rule.outgoing.x.mode | ||
+ | smsd.rule.outgoing.x.device | ||
+ | |||
+ | smsd.rule.incoming.x.number | ||
+ | smsd.rule.incoming.x.mode | ||
+ | smsd.rule.incoming.x.device | ||
+ | |||
+ | |||
+ | email.sending.status | ||
+ | email.sending.smtp.host | ||
+ | email.sending.smtp.port | ||
+ | email.sending.smtp.from | ||
+ | email.sending.smtp.authentication enum automatic, | ||
+ | email.sending.smtp.username | ||
+ | email.sending.smtp.password | ||
+ | email.sending.smtp.encryption | ||
+ | |||
+ | # Events | ||
+ | event.recipient.x.status | ||
+ | event.recipient.x.desc | ||
+ | event.recipient.x.mail | ||
+ | event.recipient.x.number | ||
+ | event.recipient.x.trap.host | ||
+ | event.recipient.x.trap.port | ||
+ | event.recipient.x.trap.username string | ||
+ | event.recipient.x.trap.password password | ||
+ | event.recipient.x.trap.auth | ||
+ | event.recipient.x.trap.enc | ||
+ | event.recipient.x.trap.engine | ||
+ | event.recipient.x.match | ||
+ | wan-up, | ||
+ | wan-down, | ||
+ | dio-in1-on, | ||
+ | dio-in2-on, | ||
+ | dio-in1-off, | ||
+ | dio-in2-off, | ||
+ | dio-out1-on, | ||
+ | dio-out2-on, | ||
+ | dio-out1-off, | ||
+ | dio-out2-off, | ||
+ | gps-up, | ||
+ | gps-down, | ||
+ | openvpn-up, | ||
+ | openvpn-down, | ||
+ | ipsec-up, | ||
+ | ipsec-down, | ||
+ | gre-up, | ||
+ | gre-down, | ||
+ | dialin-up, | ||
+ | dialin-down, | ||
+ | mobileip-up, | ||
+ | mobileip-down, | ||
+ | pptp-up, | ||
+ | pptp-down, | ||
+ | system-login-failed, | ||
+ | system-login-succeeded, | ||
+ | system-logout, | ||
+ | system-rebooting, | ||
+ | system-poweroff, | ||
+ | system-startup, | ||
+ | sdk-startup, | ||
+ | system-error, | ||
+ | system-no-error, | ||
+ | sms-sent, | ||
+ | sms-notsent, | ||
+ | sms-received, | ||
+ | sms-report-received, | ||
+ | call-incoming, | ||
+ | call-outgoing, | ||
+ | ddns-update-succeeded, | ||
+ | ddns-update-failed, | ||
+ | usb-storage-added, | ||
+ | usb-storage-removed, | ||
+ | usb-eth-added, | ||
+ | usb-eth-removed, | ||
+ | usb-serial-added, | ||
+ | usb-serial-removed, | ||
+ | system-time-updated, | ||
+ | redundancy-master, | ||
+ | redundancy-backup, | ||
+ | test | ||
+ | |||
+ | # Static Routes | ||
+ | route.0.interface | ||
+ | route.0.target | ||
+ | route.0.netmask | ||
+ | route.0.gateway | ||
+ | route.0.metric | ||
+ | |||
+ | # OSPF | ||
+ | ospf.status | ||
+ | ospf.redist.connected | ||
+ | ospf.redist.kernel | ||
+ | ospf.redist.bgp | ||
+ | ospf.redist.default | ||
+ | ospf.vrrpmasteronly | ||
+ | |||
+ | ospf.interface.x.name | ||
+ | ospf.interface.x.auth | ||
+ | ospf.interface.x.keyid | ||
+ | ospf.interface.x.key | ||
+ | ospf.interface.x.cost | ||
+ | ospf.interface.x.passive | ||
+ | ospf.router.id | ||
+ | |||
+ | ospf.network.x.prefix | ||
+ | ospf.network.x.prefixlength | ||
+ | ospf.network.x.area | ||
+ | |||
+ | # BGP | ||
+ | bgp.status | ||
+ | bgp.router.id | ||
+ | bgp.as | ||
+ | bgp.redist.connected | ||
+ | bgp.redist.kernel | ||
+ | bgp.redist.ospf | ||
+ | bgp.vrrpmasteronly | ||
+ | bgp.keepalive integer | ||
+ | bgp.holddown integer | ||
+ | |||
+ | bgp.neighbor.x.addr | ||
+ | bgp.neighbor.x.as | ||
+ | bgp.neighbor.x.weight | ||
+ | bgp.neighbor.x.password | ||
+ | bgp.neighbor.x.multihop | ||
+ | bgp.neighbor.x.extended_nexthop | ||
+ | bgp.neighbor.x.address_family | ||
+ | |||
+ | bgp.network.0.prefix | ||
+ | bgp.network.0.prefixlength | ||
+ | |||
+ | # Extended Routes | ||
+ | eroute.x.source | ||
+ | eroute.x.snetmask | ||
+ | eroute.x.target | ||
+ | eroute.x.tnetmask | ||
+ | eroute.x.proto | ||
+ | eroute.x.sport.start | ||
+ | eroute.x.sport.end | ||
+ | eroute.x.tport.start | ||
+ | eroute.x.tport.end | ||
+ | eroute.x.tos | ||
+ | 0 = normal-service, | ||
+ | 2 = minimize-cost, | ||
+ | 4 = maximize-reliability, | ||
+ | 8 = maximize-throughput, | ||
+ | 16 = minimize-delay | ||
+ | |||
+ | eroute.x.iif | ||
+ | eroute.x.gateway | ||
+ | eroute.x.oif | ||
+ | eroute.x.force | ||
+ | |||
+ | # Multipath Routes | ||
+ | mroute.x.target | ||
+ | mroute.x.netmask | ||
+ | mroute.x.interface.y.name | ||
+ | mroute.x.interface.y.weight | ||
+ | mroute.x.interface.y.nexthop | ||
+ | |||
+ | # SSH Server | ||
+ | ssh.status | ||
+ | ssh.port | ||
+ | ssh.pwlogin | ||
+ | ssh.rootlogin | ||
+ | |||
+ | # Telnet Server | ||
+ | telnet.status | ||
+ | telnet.port | ||
+ | |||
+ | # MQTT Broker | ||
+ | mqtt.status integer | ||
+ | mqtt.port integer | ||
+ | mqtt.tls integer | ||
+ | |||
+ | # Web Server | ||
+ | http.status | ||
+ | http.port | ||
+ | https.status | ||
+ | https.port | ||
+ | https.security | ||
+ | 1 = old = Firefox 1, Chrome 1, | ||
+ | IE 7, ... | ||
+ | 2 = modern = Firefox 27, Chrome 30, | ||
+ | IE 11 on Windows 7, ... | ||
+ | |||
+ | cliphp.status | ||
+ | |||
+ | |||
+ | # Serial Server | ||
+ | serial.x.status | ||
+ | |||
+ | serial.server.x.baudrate | ||
+ | 38400, | ||
+ | serial.server.x.parity | ||
+ | serial.server.x.stopbits | ||
+ | serial.server.x.databits | ||
+ | serial.server.x.xonxoff | ||
+ | serial.server.x.rtscts | ||
+ | serial.server.x.physproto | ||
+ | |||
+ | serial.server.x.protocol | ||
+ | serial.server.x.termination integer | ||
+ | serial.server.x.port | ||
+ | serial.server.x.timeout | ||
+ | 1..600 seconds | ||
+ | serial.server.x.remctl | ||
+ | serial.server.x.allowed | ||
+ | serial.server.x.banner | ||
+ | |||
+ | serial.server.x.modem | ||
+ | serial.server.x.phonebook.y.number | ||
+ | serial.server.x.phonebook.y.ip | ||
+ | serial.server.x.phonebook.y.port | ||
+ | |||
+ | # Audio | ||
+ | audio.x.volume | ||
+ | |||
+ | |||
+ | # Maintenance | ||
+ | manual.swupdate.url | ||
+ | |||
+ | auto.swupdate.status | ||
+ | auto.swupdate.time | ||
+ | auto.swupdate.url | ||
+ | |||
+ | auto.cfupdate.status | ||
+ | auto.cfupdate.time | ||
+ | auto.cfupdate.url | ||
+ | |||
+ | auto.reboot.status | ||
+ | auto.reboot.time | ||
+ | |||
+ | # VRRP | ||
+ | vrrpd.status | ||
+ | vrrpd.id | ||
+ | vrrpd.prio | ||
+ | vrrpd.interface | ||
+ | vrrpd.address | ||
+ | |||
+ | # Discovery | ||
+ | lldpd.status | ||
+ | lldpd.proto | ||
+ | lldp, cdp, sonmp, edp, fdp, irdp | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | vrrpd.x.status | ||
+ | vrrpd.x.id | ||
+ | vrrpd.x.prio | ||
+ | vrrpd.x.interface | ||
+ | vrrpd.x.address | ||
+ | |||
+ | # IGMP Proxy | ||
+ | igmpproxy.status | ||
+ | igmpproxy.interface | ||
+ | igmpproxy.downstream | ||
+ | or comma-separated list of interfaces | ||
+ | igmpproxy.sender.x.network | ||
+ | igmpproxy.sender.x.netmask | ||
+ | |||
+ | # Static Multicast Routing | ||
+ | smcroute.status | ||
+ | |||
+ | smcroute.x.group | ||
+ | smcroute.x.source | ||
+ | smcroute.x.from | ||
+ | smcroute.x.to | ||
+ | |||
+ | # Softflow | ||
+ | softflow.x.status | ||
+ | softflow.x.interface | ||
+ | softflow.x.host | ||
+ | softflow.x.port | ||
+ | softflow.x.version | ||
+ | softflow.x.maxflow | ||
+ | softflow.x.tracklevel | ||
+ | softflow.x.samplerate | ||
+ | |||
+ | # ARP | ||
+ | arp.x.interface | ||
+ | arp.x.host | ||
+ | arp.x.address | ||
+ | |||
+ | # Arpwatch | ||
+ | arpwatch.status | ||
+ | arpwatch.x.interface | ||
+ | |||
+ | # FTP Daemon | ||
+ | ftpd.status | ||
+ | |||
+ | # TFTP Daemon | ||
+ | tftpd.status | ||
+ | tftpd.directory | ||
+ | |||
+ | # SDK | ||
+ | sdk.status | ||
+ | sdk.storage | ||
+ | sdk.size | ||
+ | sdk.sched | ||
+ | sdk.watchdog | ||
+ | sdk.maxvsz integer | ||
+ | |||
+ | sdk.trigger.x.name | ||
+ | sdk.trigger.x.timecond | ||
+ | workdays, | ||
+ | sdk.trigger.x.timespec | ||
+ | sdk.trigger.x.event | ||
+ | wan-down, | ||
+ | dio-in1-on, | ||
+ | dio-in2-on, | ||
+ | dio-in1-off, | ||
+ | dio-in2-off, | ||
+ | dio-out1-on, | ||
+ | dio-out2-on, | ||
+ | dio-out1-off, | ||
+ | dio-out2-off, | ||
+ | gps-up, | ||
+ | gps-down, | ||
+ | openvpn-up, | ||
+ | openvpn-down, | ||
+ | ipsec-up, | ||
+ | ipsec-down, | ||
+ | gre-up, | ||
+ | gre-down, | ||
+ | dialin-up, | ||
+ | dialin-down, | ||
+ | mobileip-up, | ||
+ | mobileip-down, | ||
+ | pptp-up, | ||
+ | pptp-down, | ||
+ | system-login-failed, | ||
+ | system-login-succeeded, | ||
+ | system-logout, | ||
+ | system-rebooting, | ||
+ | system-poweroff, | ||
+ | system-startup, | ||
+ | sdk-startup, | ||
+ | system-error, | ||
+ | system-no-error, | ||
+ | sms-sent, | ||
+ | sms-notsent, | ||
+ | sms-received, | ||
+ | sms-report-received, | ||
+ | call-incoming, | ||
+ | call-outgoing, | ||
+ | ddns-update-succeeded, | ||
+ | ddns-update-failed, | ||
+ | usb-storage-added, | ||
+ | usb-storage-removed, | ||
+ | usb-eth-added, | ||
+ | usb-eth-removed, | ||
+ | usb-serial-added, | ||
+ | usb-serial-removed, | ||
+ | system-time-updated, | ||
+ | redundancy-master, | ||
+ | redundancy-backup, | ||
+ | test | ||
+ | |||
+ | sdk.script.0.name | ||
+ | sdk.script.0.desc | ||
+ | sdk.script.0.args | ||
+ | |||
+ | sdk.job.0.name | ||
+ | sdk.job.0.trigger | ||
+ | sdk.job.0.script | ||
+ | sdk.job.0.args | ||
+ | regex für args:a-z, A-Z, 0-9, | ||
+ | # Virtualization | ||
+ | virt.status | ||
+ | |||
+ | virt.guest.x.status | ||
+ | virt.guest.x.desc | ||
+ | virt.guest.x.type | ||
+ | virt.guest.x.storage | ||
+ | virt.guest.x.limit.cpu | ||
+ | virt.guest.x.limit.memory | ||
+ | |||
+ | virt.guest.x.network.y.mode | ||
+ | virt.guest.x.network.y.brdev | ||
+ | virt.guest.x.network.y.address | ||
+ | virt.guest.x.network.y.netmask | ||
+ | virt.guest.x.network.y.gateway | ||
+ | |||
+ | virt.guest.x.device.y.name | ||
+ | virt.guest.x.device.y.type | ||
+ | |||
+ | virt.guest.x.install.url URL https:// | ||
+ | / | ||
+ | virt.guest.x.install.trigger integer 0 = disabled, 1 = enabled Install on Apply | ||
+ | |||
+ | #storage | ||
+ | storage.flashroot.id | ||
+ | storage.flashroot.automount | ||
+ | storage.flashroot.mountpoint | ||
+ | |||
+ | storage.flashstorage.id | ||
+ | storage.flashstorage.automount | ||
+ | storage.flashstorage.mountpoint | ||
+ | |||
+ | storage.extended.id | ||
+ | storage.extended.automount | ||
+ | storage.extended.mountpoint | ||
+ | |||
+ | storage.usb0.id | ||
+ | storage.usb0.automount | ||
+ | storage.usb0.mountpoint | ||
+ | |||
+ | storage.sdcard0.id | ||
+ | storage.sdcard0.automount | ||
+ | storage.sdcard0.mountpoint | ||
+ | |||
+ | # custom | ||
+ | custom.status | ||
+ | custom.secret | ||
+ | custom.var0 | ||
+ | custom.var1 | ||
+ | custom.var2 | ||
+ | custom.var3 | ||
+ | custom.var4 | ||
+ | |||
+ | custom.table0.x.var0 | ||
+ | custom.table0.x.var1 | ||
+ | custom.table0.x.var2 | ||
+ | custom.table0.x.var3 | ||
+ | custom.table0.x.var4 | ||
+ | |||
+ | custom.table1.x.var0 | ||
+ | custom.table1.x.var1 | ||
+ | custom.table1.x.var2 | ||
+ | custom.table1.x.var3 | ||
+ | custom.table1.x.var4 | ||
+ | |||
+ | custom.table2.0.var0 | ||
+ | custom.table2.0.var1 | ||
+ | custom.table2.0.var2 | ||
+ | custom.table2.0.var3 | ||
+ | custom.table2.0.var4 | ||
+ | |||
+ | |||
+ | checkEmail: format local@domain, | ||
+ | ApnUsername=ApnPassword: | ||
+ | Passwd: not allowed &, | ||
+ | </code> |