Differences

This shows you the differences between two versions of the page.

--- configuration:telephone-on-serial [2017/10/18 12:10] – [SDK-Script] gray
+++ configuration:telephone-on-serial [2017/10/23 16:35] – [SDK-Script] fachet
@@ Line 7: / Line 7: @@
 ===== Router License Generator =====
-The voice gateway function must have a license in order to use it. Unter the „SYSTEM“ sub-item „Licensing“ you can see your existing licenses. If you need a license, you can get it via the support of netModule.
+The voice gateway function must have a license in order to use it. Unter the „SYSTEM“ sub-item „Licensing“ you can see your existing licenses.
 {{:configuration:licensing_1.png?direct&900|}}
@@ Line 44: / Line 44: @@
 {{:configuration:sdk_10.png?direct&900|}}
-Next, we need to set the trigger for the script under the „Triggers“ option. Here again a name must be assigned for the function. Under the Type option, „evebt-based“ is selected. The function „system-startuo“ is used as an event.
+Next, we need to set the trigger for the script under the „Triggers“ option. Here again a name must be assigned for the function. Under the Type option, „event-based“ is selected. The function „system-startup“ is used as an event.
 {{:configuration:trigger_11.png?direct&900|}}
@@ Line 73: / Line 73: @@
 The SDK script „serial-write.are“ us extended for output of the call number on the serial interface.
+<code - serial-write.are   >
-<code - phone_number_on_serial_port.ads   >
+/* DESC: This script can be used to write calling phone numbers
-/* DESC: This script can be used to write a message to the serial port.
+ * CR/LF terminated to the serial port.
- * Copyright (C) 2017 NetModule AG, Switzerland
+ *
+ * Copyright (C) 2017 NetModule AG, Switzerland (arg)
  */
-void usage()
+DEV = "SERIAL1";
-{
-    printf("usage: phone number on serial port.are <msg>\n");
+/* open serial port  */
-    exit(1);
+fd = nb_serial_open(DEV);
+if (fd < 0) {
+  nb_syslog("Unable to open %s", DEV);
+  exit(2);
 }
-if (argc < 1) {
+ret = nb_serial_setattr(DEV, 115200, 8, 1, 0, 0);
-    usage();
+if (ret != 0) {
+  nb_syslog("Could not set serial attributes on %s return code %i", DEV, ret);
+  exit(3);
 }
-DEV = "SERIAL1";
-while(true)
-{
- MSG = nb_voice_event(1).call.calling;
- if ( !is_void(MSG))
- {
- MSG = left(MSG,strlen(MSG)-5);
- MSG = right(MSG,strlen(MSG)-6);
- /* check serial port config */
- st = nb_config_get("serial.0.status");
- if (st != "2") {
-    printf("Serial port is not enabled for us\n");
-    exit(1);
- }
- ret = nb_serial_setattr(DEV, 115200, 8, 1, 0, 0);
- if (ret != 0) {
-     printf("Could not set serial attributes: %i \n",ret);
-     exit(1);
- }
- fd = nb_serial_open(DEV);
- if (fd < 0) {
-     printf("Unable to open %s\n", DEV);
-     exit(1);
- }
- message = strcat(MSG, "\r\n");
+while (true) {
- ret = write(fd, message, strlen(message));
+  msg = nb_voice_event(1).call.calling;	// check event with 1sec timeout
- if (ret> 0) {
+  if (!is_void(msg)) {
-     printf("Wrote %d bytes to %s\n", ret, DEV);
+    msg = left(msg, strlen(msg) - 5); // trim phone number
- } else {
+    msg = right(msg, strlen(msg) - 6);
-     printf("Unable to write to %s\n", DEV);
+    msg = strcat(msg, "\r\n");
- }
+    len = strlen(msg);
- close(fd);
- }
+    if (write(fd, msg, len) != len) {
+	nb_syslog("Error on writing %d bytes to %s", len, DEV);
+	close(fd);
+	exit(4);
+    }
+  }
 }
+/* not reached */
-exit(0);
 </code>
-The SDK command „nb_voice_event“ makes it possible to query the status of the voice call. At the address of the router  http://192.168.1.1/admin/sdk-api-functions.php#sec2.15 can get further information of the command.
+The SDK command „nb_voice_event“ makes it possible to query the status of the voice call. For more information about the SDK-API, see please to the Weblink http://wiki.netmodule.com/documentation/start under the item Products under one of the router's model you have.
-With a loop and the SDK command, you get when a voice call comes in.
+You can use the test window to see when a voice call comes in.
-<code - voice_evenet.ads >
-	while(true)
-	{
-	dump(nb_voice_event(10));
-	}
+<code>
+dump(nb_voice_event(10)); // wait 10secs for call
 </code>
@@ Line 155: / Line 127: @@
 <code>
-void
 struct(2): {
   .call = struct(4): {
@@ Line 174: / Line 143: @@
             .state = string[6]: "hungup"
           }
-  .type = string[6]: "hungup"
 }

User Tools

Site Tools

Differences

Page Tools