NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
configuration:mib [2015/05/19 12:32] – hessconfiguration:mib [2017/09/15 14:20] – fachet
Line 1: Line 1:
 ====== Management Information Base (MIB) ====== ====== Management Information Base (MIB) ======
 <code c mib.txt> <code c mib.txt>
 +
 -- **************************************************************************** -- ****************************************************************************
 -- NetModule AG VENDOR MIB -- NetModule AG VENDOR MIB
 -- --
 -- --
--- (c) COPYRIGHT 2014 by NetModule AG, Switzerland+-- (c) COPYRIGHT 2017 by NetModule AG, Switzerland
 -- All rights reserved. -- All rights reserved.
 -- --
Line 22: Line 23:
        Counter64, TimeTicks                     FROM SNMPv2-SMI        Counter64, TimeTicks                     FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString,        TEXTUAL-CONVENTION, DisplayString,
-       PhysAddress, TruthValue, RowStatus,+       PhysAddress, TruthValue, RowStatus, DateAndTime,
        TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC        TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF        MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
Line 34: Line 35:
  
 nb MODULE-IDENTITY nb MODULE-IDENTITY
-        LAST-UPDATED "201405091000Z"+        LAST-UPDATED "201701131200Z"
         ORGANIZATION "NetModule AG"         ORGANIZATION "NetModule AG"
         CONTACT-INFO         CONTACT-INFO
Line 40: Line 41:
         DESCRIPTION         DESCRIPTION
             "MIB module which defines the NB router specific entities"             "MIB module which defines the NB router specific entities"
 +
 +        REVISION "201701131200Z"
 +        DESCRIPTION
 +             "MIB for software release 4.0"
 +
 +        REVISION "201610181200Z"
 +        DESCRIPTION
 +             "MIB for software release 4.0"
 +
 +        REVISION "201607121200Z"
 +        DESCRIPTION
 +             "MIB for software release 4.0"
 +
 +        REVISION "201603021200Z"
 +        DESCRIPTION
 +             "MIB for software release 3.9"
 +
 +        REVISION "201411241000Z"
 +        DESCRIPTION
 +             "MIB for software release 3.8"
  
         REVISION "201405091000Z"         REVISION "201405091000Z"
Line 47: Line 68:
         REVISION "201212191000Z"         REVISION "201212191000Z"
         DESCRIPTION         DESCRIPTION
-            "MIB for software release 3.6"+             "MIB for software release 3.6"
         ::= { netmodule 10 }         ::= { netmodule 10 }
  
Line 66: Line 87:
 admin         OBJECT IDENTIFIER ::= { nb  40 } admin         OBJECT IDENTIFIER ::= { nb  40 }
 dio           OBJECT IDENTIFIER ::= { nb  53 } dio           OBJECT IDENTIFIER ::= { nb  53 }
 +sdk           OBJECT IDENTIFIER ::= { nb  90 }
 traps         OBJECT IDENTIFIER ::= { nb 100 } traps         OBJECT IDENTIFIER ::= { nb 100 }
  
Line 76: Line 98:
 nb3710        OBJECT IDENTIFIER ::= { products 52 } nb3710        OBJECT IDENTIFIER ::= { products 52 }
 nb3720        OBJECT IDENTIFIER ::= { products 53 } nb3720        OBJECT IDENTIFIER ::= { products 53 }
 +nb2800        OBJECT IDENTIFIER ::= { products 54 }
 +nb3701        OBJECT IDENTIFIER ::= { products 55 }
 +nb3711        OBJECT IDENTIFIER ::= { products 56 }
 +nb3800        OBJECT IDENTIFIER ::= { products 57 }
  
 -- **************************************************************************** -- ****************************************************************************
Line 104: Line 130:
         "The serial number of the device"         "The serial number of the device"
     ::= { admin 3 }     ::= { admin 3 }
 +
 +configDesc OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The description of the current configuration"
 +    ::= { admin 4 }
 +
 +configHash OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The hash of the current configuration"
 +    ::= { admin 5 }
 +
 +softwareHash OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The hash of the current software"
 +    ::= { admin 6 }
 +
 +systemStatus OBJECT-TYPE
 +    SYNTAX  INTEGER {
 +                ok (1),
 +                degraded (2),
 +                outoforder (3)
 +            }
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The global system status"
 +    ::= { admin 7 }
 +
 +systemError OBJECT-TYPE
 +    SYNTAX  DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "A comma-separated list of services which are in error state"
 +    ::= { admin 8 }
 +
 +systemDate OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current local date and time of day."
 +    ::= { admin 9 }
  
 deviceRestart OBJECT-TYPE deviceRestart OBJECT-TYPE
Line 114: Line 192:
         "Force a device restart"         "Force a device restart"
     ::= { admin 10 }     ::= { admin 10 }
 +
 +-- Update --
 +
 +updateOperation OBJECT-TYPE
 +    SYNTAX  INTEGER {
 +                update (0),
 +                store (1)
 +            }
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "The desired operation for configuration or software updates"
 +    ::= { admin 11 }
 +
 +switchOperation OBJECT-TYPE
 +    SYNTAX  INTEGER {
 +                software (0),
 +                config (1)
 +            }
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "The operation trigger to switch to alternative software or configuration"
 +    ::= { admin 12 }
 +
 +softwareActivationDate OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "The date and time when the alternative software shall be activated"
 +    ::= { admin 13 }
 +
 +configActivationDate OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "The date and time when the alternative configuration shall be activated"
 +    ::= { admin 14 }
 +
 +-- Configuration Update --
  
 configUpdate OBJECT-TYPE configUpdate OBJECT-TYPE
Line 120: Line 240:
     STATUS  current     STATUS  current
     DESCRIPTION     DESCRIPTION
-        "Update the system configuration from the specified URL.  +        "Update the system configuration from the specified URL,  
-          The URL must be preceded by one of the prefixes tftp://, ftp://, http://+          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
           and either point to the update package or to a server directory which            and either point to the update package or to a server directory which 
           contains a file named <serial-number>.zip"           contains a file named <serial-number>.zip"
-    ::= { admin 11 }+    ::= { admin 20 }
  
 configUpdateStatus OBJECT-TYPE configUpdateStatus OBJECT-TYPE
     SYNTAX  INTEGER {     SYNTAX  INTEGER {
 +                stored (0),
                 succeeded (1),                 succeeded (1),
                 failed (2),                 failed (2),
Line 137: Line 258:
     DESCRIPTION     DESCRIPTION
         "The status of the last configuration update cycle"         "The status of the last configuration update cycle"
-    ::= { admin 12 }+    ::= { admin 21 } 
 + 
 +configUpdateError OBJECT-TYPE 
 +    SYNTAX      Integer32 
 +    MAX-ACCESS  read-only 
 +    STATUS  current 
 +    DESCRIPTION 
 +        "The error code of the last configuration update" 
 +    ::= { admin 22 } 
 + 
 +configUpdated OBJECT-TYPE 
 +    SYNTAX      DateAndTime 
 +    MAX-ACCESS  read-only 
 +    STATUS  current 
 +    DESCRIPTION 
 +        "The date of the last configuration update" 
 +    ::= { admin 23 } 
 + 
 +configUpdateMode OBJECT-TYPE 
 +    SYNTAX  INTEGER { 
 +                full (0), 
 +                partial (1) 
 +            } 
 +    MAX-ACCESS  read-write 
 +    STATUS  current 
 +    DESCRIPTION 
 +        "The desired system configuration update mode (full or partial)" 
 +    ::= { admin 24 } 
 + 
 +-- Software Update --
  
 softwareUpdate OBJECT-TYPE softwareUpdate OBJECT-TYPE
Line 145: Line 295:
     DESCRIPTION     DESCRIPTION
         "Update the system software from the specified URL,          "Update the system software from the specified URL, 
-          the URL must be preceded by one of the prefixes tftp://, ftp://, http:// +          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://) 
-          and point to the to be installed image." +          and point to the to be installed image" 
-    ::= { admin 13 }+    ::= { admin 25 }
  
 softwareUpdateStatus OBJECT-TYPE softwareUpdateStatus OBJECT-TYPE
     SYNTAX  INTEGER {     SYNTAX  INTEGER {
 +                stored (0),
                 succeeded (1),                 succeeded (1),
                 failed (2),                 failed (2),
Line 160: Line 311:
     DESCRIPTION     DESCRIPTION
         "The status of the last software update cycle"         "The status of the last software update cycle"
-    ::= { admin 14 }+    ::= { admin 26 }
  
 +softwareUpdateError OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The error code of the last software update"
 +    ::= { admin 27 }
 +
 +softwareUpdated OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The date of the last software update"
 +    ::= { admin 28 }
 +
 +-- Alternative Configuration --
 +
 +altConfigDesc OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The description of the alternative configuration"
 +    ::= { admin 30 }
 +
 +altConfigHash OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The hash of the alternative configuration"
 +    ::= { admin 31 }
 +
 +altConfigUpdated OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The date of the last alternative configuration update"
 +    ::= { admin 32 }
 +
 +-- Alternative Software --
 +
 +altSoftwareVersion OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The version of the alternative software"
 +    ::= { admin 35 }
 +
 +altSoftwareHash OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The hash of the alternative software"
 +    ::= { admin 36 }
 +
 +altSoftwareUpdated OBJECT-TYPE
 +    SYNTAX      DateAndTime
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The date of the last alternative software update"
 +    ::= { admin 37 }
 +
 +-- Upload Syslog --
 +
 +syslogUpload OBJECT-TYPE
 +    SYNTAX  URLString
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "Upload the current system logs to the specified URL, 
 +          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
 +          and point to the path where the system log shall be stored."
 +    ::= { admin 40 }
 +
 +syslogUploadStatus OBJECT-TYPE
 +    SYNTAX  INTEGER {
 +                succeeded (1),
 +                failed (2),
 +                inprogress (3),
 +                notstarted (4)
 +            }
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The status of the last syslog upload cycle"
 +    ::= { admin 41 }
 +
 +-- Upload Config --
 +
 +configUpload OBJECT-TYPE
 +    SYNTAX  URLString
 +    MAX-ACCESS  read-write
 +    STATUS  current
 +    DESCRIPTION
 +        "Upload the current configuration to the specified URL, 
 +          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
 +          and point to the path where the config shall be stored."
 +    ::= { admin 42 }
 +
 +configUploadStatus OBJECT-TYPE
 +    SYNTAX  INTEGER {
 +                succeeded (1),
 +                failed (2),
 +                inprogress (3),
 +                notstarted (4)
 +            }
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The status of the last config upload cycle"
 +    ::= { admin 43 }
  
 -- **************************************************************************** -- ****************************************************************************
Line 192: Line 460:
     wwanLocalAreaIdentification DisplayString,     wwanLocalAreaIdentification DisplayString,
     wwanLocalAreaCode DisplayString,     wwanLocalAreaCode DisplayString,
-    wwanCellId DisplayString    +    wwanCellId DisplayString, 
 +    wwanTemperature DisplayString, 
 +    wwanIccid DisplayString
 } }
  
Line 275: Line 545:
     ::= { nbWwanEntry 10 }     ::= { nbWwanEntry 10 }
          
 +wwanTemperature OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current temperature of the WWAN modem"
 +    ::= { nbWwanEntry 11 }
 +
 +wwanIccid OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The Integrated Circuit Card Identifier (ICCID) of the SIM connected to the WWAN modem"
 +    ::= { nbWwanEntry 12 }
  
 -- **************************************************************************** -- ****************************************************************************
Line 304: Line 589:
     gnssLon DisplayString,     gnssLon DisplayString,
     gnssAlt DisplayString,     gnssAlt DisplayString,
-    gnssNumSat Integer32+    gnssNumSat Integer32, 
 +    gnssNumSatUsed Integer32, 
 +    gnssHorizontalSpeed DisplayString, 
 +    gnssVerticalSpeed DisplayString, 
 +    gnssTrackAngle DisplayString
 } }
  
Line 360: Line 649:
     STATUS      current     STATUS      current
     DESCRIPTION     DESCRIPTION
-        "The current number of available satellites for the GNSS device"+        "The current number of satellites in view for the GNSS device"
     ::= { nbGnssEntry 7 }     ::= { nbGnssEntry 7 }
 +
 +gnssNumSatUsed OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current number of used satellites for the GNSS device"
 +    ::= { nbGnssEntry 8 }
 +
 +gnssHorizontalSpeed OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current horizontal speed over the ground value in meter per second received by the GNSS device"
 +    ::= { nbGnssEntry 9 }
 +
 +gnssVerticalSpeed OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current vertical speed value in meter per second received by the GNSS device"
 +    ::= { nbGnssEntry 10 }
 +
 +gnssTrackAngle OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The current track angle value in degrees received by the GNSS device"
 +    ::= { nbGnssEntry 11 }
  
  
Line 389: Line 710:
     wlanModuleName DisplayString,     wlanModuleName DisplayString,
     wlanModuleType DisplayString,     wlanModuleType DisplayString,
-    wlanNumClients Integer32 +    wlanNumClients Integer32, 
-    +    wlanModuleChannel Integer32, 
 +    wlanModuleFrequency Integer32, 
 +    wlanSignalStrength Integer32
 } }
  
Line 422: Line 745:
     STATUS      current     STATUS      current
     DESCRIPTION     DESCRIPTION
-        "Current number of clients connected to the WLAN module (if operated as access point)"+        "Current number of clients connected to the WLAN module in access-point mode"
     ::= { nbWlanEntry 4 }     ::= { nbWlanEntry 4 }
  
 +wlanModuleChannel OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "Current channel of the WLAN module"
 +    ::= { nbWlanEntry 5 }
 +
 +wlanModuleFrequency OBJECT-TYPE
 +    SYNTAX      Integer32
 +    UNITS       "MHz"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "Current frequency of the WLAN module"
 +    ::= { nbWlanEntry 6 }
 +
 +wlanSignalStrength OBJECT-TYPE
 +    SYNTAX      Integer32
 +    UNITS       "dBm"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "Current signal strength of the WLAN module in client mode"
 +    ::= { nbWlanEntry 7 }
 +
 +-- ****************************************************************************
 +-- NBWlanStationTable
 +-- ****************************************************************************
 +
 +nbWlanStationTable OBJECT-TYPE
 +    SYNTAX      SEQUENCE OF NBWlanStationEntry
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION
 +        "A table shows current connected clients "
 +    ::= { nb 61 }
 +
 +nbWlanStationEntry OBJECT-TYPE
 +    SYNTAX      NBWlanStationEntry
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION
 +        "An entry descibes one connected client"
 +    INDEX       { wlanStationIndex }
 +    ::= { nbWlanStationTable 1 }
 +
 +NBWlanStationEntry ::= SEQUENCE {
 +    wlanStationIndex Integer32,
 +    wlanStationInterface DisplayString,
 +    wlanStationMac DisplayString,
 +    wlanStationSignalStrength Integer32,
 +    wlanStationBitrate Integer32,
 +    wlanStationRxBytes Counter64,
 +    wlanStationTxBytes Counter64,
 +    wlanStationInactive Integer32
 +}
 +
 +wlanStationIndex OBJECT-TYPE
 +    SYNTAX      Integer32(0..254)
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION
 +        "WLAN station index"
 +    ::= { nbWlanStationEntry 1 }
 +
 +wlanStationInterface OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The WLAN interface name"
 +    ::= { nbWlanStationEntry 2 }
 +
 +wlanStationMac OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The MAC address of a connected station"
 +    ::= { nbWlanStationEntry 3 }
 +
 +wlanStationSignalStrength OBJECT-TYPE
 +    SYNTAX      Integer32
 +    UNITS       "dBm"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The signal strength of a connected station"
 +    ::= { nbWlanStationEntry 4 }
 +
 +wlanStationBitrate OBJECT-TYPE
 +    SYNTAX      Integer32
 +    UNITS       "Mbit/s"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The bitrate of a connected station"
 +    ::= { nbWlanStationEntry 5 }
 +
 +wlanStationRxBytes OBJECT-TYPE
 +    SYNTAX      Counter64
 +    UNITS       "bytes"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The number of received bytes of a connected station"
 +    ::= { nbWlanStationEntry 6 }
 +
 +wlanStationTxBytes OBJECT-TYPE
 +    SYNTAX      Counter64
 +    UNITS       "bytes"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The number of transmitted bytes of a connected station"
 +    ::= { nbWlanStationEntry 7 }
 +
 +wlanStationInactive OBJECT-TYPE
 +    SYNTAX      Integer32
 +    UNITS       "ms"
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "The inactivity time of a connected station"
 +    ::= { nbWlanStationEntry 8 }
 +
 +
 +-- ****************************************************************************
 +-- NBWanTable
 +-- ****************************************************************************
 +
 +nbHotLink OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS  current
 +    DESCRIPTION
 +        "The active WAN link"
 +    ::= { nb 70 }
 +
 +nbWanTable OBJECT-TYPE
 +    SYNTAX      SEQUENCE OF NBWanEntry
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION "The table describing any WAN link and their current status"
 +    ::= { nb 71 }
 +
 +nbWanEntry OBJECT-TYPE
 +    SYNTAX      NBWanEntry
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION "An entry describing a WAN link and its current status"
 +    INDEX       { wanLinkIndex }
 +    ::= { nbWanTable 1 }
 +
 +NBWanEntry ::= SEQUENCE {
 +    wanLinkIndex Integer32,
 +    wanLinkName DisplayString,
 +    wanLinkState DisplayString,
 +    wanLinkSince DisplayString,
 +    wanLinkType DisplayString,
 +    wanLinkInterface DisplayString,
 +    wanLinkAddress DisplayString,
 +    wanLinkGateway DisplayString,
 +    wanLinkNetmask DisplayString,
 +    wanDialAttempts Integer32,
 +    wanDialSuccess Integer32,
 +    wanDialFailures Integer32,
 +    wanDataDownloaded Integer32,
 +    wanDataUploaded Integer32,
 +    wanDownloadRate Integer32,
 +    wanUploadRate Integer32,
 +    wanDataDownloadedRoaming Integer32,
 +    wanDataUploadedRoaming Integer32
 +}
 +
 +wanLinkIndex OBJECT-TYPE
 +    SYNTAX      Integer32(0..254)
 +    MAX-ACCESS  not-accessible
 +    STATUS      current
 +    DESCRIPTION
 +   "WAN link index"
 +    ::= { nbWanEntry 1 }
 +
 +wanLinkName OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link name"
 +    ::= { nbWanEntry 2 }
 +
 +wanLinkState OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link state"
 +    ::= { nbWanEntry 3 }
 +
 +wanLinkSince OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link since up"
 +    ::= { nbWanEntry 4 }
 +
 +wanLinkType OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link type"
 +    ::= { nbWanEntry 5 }
 +
 +wanLinkInterface OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link interface"
 +    ::= { nbWanEntry 6 }
 +
 +wanLinkAddress OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link address"
 +    ::= { nbWanEntry 7 }
 +
 +wanLinkGateway OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link gateway"
 +    ::= { nbWanEntry 8 }
 +
 +wanLinkNetmask OBJECT-TYPE
 +    SYNTAX      DisplayString
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link netmask"
 +    ::= { nbWanEntry 9 }
 +
 +wanDialAttempts OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link dial attempts"
 +    ::= { nbWanEntry 10 }
 +
 +wanDialSuccess OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link dial success"
 +    ::= { nbWanEntry 11 }
 +
 +
 +wanDialFailures OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link dial failures"
 +    ::= { nbWanEntry 12 }
 +
 +
 +wanDataDownloaded OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link data downloaded"
 +    ::= { nbWanEntry 13 }
 +
 +
 +wanDataUploaded OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link data uploaded"
 +    ::= { nbWanEntry 14 }
 +
 +
 +wanDownloadRate OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link download rate"
 +    ::= { nbWanEntry 15 }
 +
 +
 +wanUploadRate OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link upload rate"
 +    ::= { nbWanEntry 16 }
 +
 +wanDataDownloadedRoaming OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link data downloaded during roaming"
 +    ::= { nbWanEntry 17 }
 +
 +wanDataUploadedRoaming OBJECT-TYPE
 +    SYNTAX      Integer32
 +    MAX-ACCESS  read-only
 +    STATUS      current
 +    DESCRIPTION
 +        "WAN link data uploaded during roaming"
 +    ::= { nbWanEntry 18 }
  
 -- **************************************************************************** -- ****************************************************************************
Line 502: Line 1149:
  
 events          OBJECT IDENTIFIER ::= { traps 0 } events          OBJECT IDENTIFIER ::= { traps 0 }
 +
 +sdk-trap NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "SDK trap"
 +    ::= { events 1 }
  
 wan-up NOTIFICATION-TYPE wan-up NOTIFICATION-TYPE
Line 662: Line 1314:
     DESCRIPTION "System time has been updated"     DESCRIPTION "System time has been updated"
     ::= { events 508 }     ::= { events 508 }
 +
 +system-poweroff NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "System poweroff has been triggered"
 +    ::= { events 509 }
 +
 +system-error NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "System is in error state"
 +    ::= { events 510 }
 +
 +system-no-error NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "System left error state"
 +    ::= { events 511 }
  
 sms-sent NOTIFICATION-TYPE sms-sent NOTIFICATION-TYPE
Line 732: Line 1399:
     DESCRIPTION "USB serial device has been removed"     DESCRIPTION "USB serial device has been removed"
     ::= { events 906 }     ::= { events 906 }
 +
 +redundancy-master NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "System is now master router"
 +    ::= { events 1001 }
 +
 +redundancy-backup NOTIFICATION-TYPE
 +    STATUS current
 +    DESCRIPTION "System is now backup router"
 +    ::= { events 1002 }
  
 END END
 +
 +
 </code> </code>

Page Tools

configuration/mib.txt · Last modified: 2022/03/16 13:31 by fachet