This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
configuration:gre [2016/08/15 07:59] – dotoli | configuration:gre [2016/08/15 08:44] – dotoli | ||
---|---|---|---|
Line 3: | Line 3: | ||
- | TAP mode: | + | TUN mode:\\ |
- | {{: | + | {{: |
+ | |||
+ | Peer address: Public IP address of the remote station (NB1600-X, cisco router ...)\\ | ||
+ | Local tunnel address/ | ||
+ | Remote network: Destination network / Network of the remote router\\ | ||
- | |||
- | Configure of Box1 TAP mode: | ||
- | |||
- | config.version=1.8 \\ | ||
- | config.product=1600 \\ | ||
- | network.hostname=NB1600\\ | ||
- | cert.settings.phrase=[enc]\\ | ||
- | wwan.0.status=1\\ | ||
- | wwan.0.card=0\\ | ||
- | wwan.0.sim=0\\ | ||
- | wwan.0.number=*99*\\ | ||
- | wwan.0.username=testprofil\\ | ||
- | wwan.0.password=[enc]\\ | ||
- | wwan.0.apn=corporate.swisscom.ch\\ | ||
- | wwan.0.auth=3\\ | ||
- | wwan.0.hdrcomp=0\\ | ||
- | wwan.0.softcomp=0\\ | ||
- | wwan.0.isdn=0\\ | ||
- | usb.status=0\\ | ||
- | usb.0.enabled=0\\ | ||
- | usb.1.enabled=0\\ | ||
- | autorun.status=0\\ | ||
- | cliphp.status=0\\ | ||
- | network.lan.1.address=192.168.4.1\\ | ||
- | network.dhcp.0.end=192.168.1.120\\ | ||
- | network.dhcp.1.start=192.168.4.100\\ | ||
- | network.dhcp.1.end=192.168.4.199\\ | ||
- | wanlink.0.mode=1\\ | ||
- | wanlink.0.name=wwan0\\ | ||
- | wanlink.0.prio=1\\ | ||
- | wanlink.0.weight=0\\ | ||
- | gre.status=1\\ | ||
- | gre.tunnel.0.mode=1\\ | ||
- | gre.tunnel.0.type=tap\\ | ||
- | gre.tunnel.0.peer=138.188.50.3\\ | ||
- | gre.tunnel.0.brdev=lan0\\ | ||
- | admin.password=[enc]\\ | ||
- | ssh.port=22\\ | ||
- | telnet.port=23\\ | ||
- | |||
- | **Configure of Box2: | ||
- | ** | ||
- | |||
- | {{: |